On-line UV-C prototype for postharvest antifungal treatment of citrus fruits
Synthetic fungicides used for postharvest treatment of citrus fruits are considered by consumers as a risk to human health and environment and alternatives to these chemicals that leave no residue on fruit are increasingly demanded. UV-C light irradiation is a clean and safe technology that when...
| Main Authors: | , , , |
|---|---|
| Format: | conferenceObject |
| Language: | Inglés |
| Published: |
CIGR-AgEng
2021
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/20.500.11939/7079 |
| _version_ | 1855032541837262848 |
|---|---|
| author | Ibiza Mauri, Salvador Montesinos-Herrero, Clara Palou, Lluís Adrados, Carlos M. |
| author_browse | Adrados, Carlos M. Ibiza Mauri, Salvador Montesinos-Herrero, Clara Palou, Lluís |
| author_facet | Ibiza Mauri, Salvador Montesinos-Herrero, Clara Palou, Lluís Adrados, Carlos M. |
| author_sort | Ibiza Mauri, Salvador |
| collection | ReDivia |
| description | Synthetic fungicides used for postharvest treatment of citrus fruits are considered by
consumers as a risk to human health and environment and alternatives to these chemicals
that leave no residue on fruit are increasingly demanded. UV-C light irradiation is a clean and
safe technology that when applied at the right doses may induce fruit resistance to
postharvest diseases, reducing the need for chemical treatments.
The objective of present study was to evaluate the preventive effect of UV-C light treatments
against citrus postharvest green mould caused by the pathogen Penicillium digitatum. For
this purpose, ‘Lanelate’ oranges and ‘Ortanique’ mandarins were puncture-injured in one
side of the equatorial zone, treated with UV-C light at doses of 2.5 or 5 kJ/m2 and held at
20ºC and 90% RH for 6 days before inoculation with P. digitatum at 103 or 104 spores/ml.
Control fruit was inoculated but not treated. Four replicates of 10 fruit each were used for
each treatment.
A new UV-C reactor prototype was used for postharvest treatment of citrus fruits. This
prototype was able to treat the fruit while rolling, therefore exposing the surface of the fruit
more homogeneously to UV-C light. The reactor, assembled on a commercial 3-m long roller
conveyor, consisted of three low pressure 55-W mercury-vapour lamps, mounted on an
aluminium frame placed 16 cm above the conveyor belt. UV-C average power supplied by
the lamps at 6 cm above the conveyor belt was 5 mW/cm2. In order to regulate the flow rate
and thus the UV-C exposure dose, the speed of the conveyor belt was set to provide a
treatment time from 25 s to 2 min, which yielded a UV-C light dose from 2.25 to 5 kJ/m2,
respectively.
The number of infected fruit (disease incidence) as well as the diameter of the lesion
(disease severity) and the percentage of fruit showing sporulated lesions (pathogen
sporulation) were assessed after 3 and 7 days of incubation at 20ºC. Green mould incidence
on ‘Lanelate’ oranges treated with a UV-C dose of 5 kJ/m2 was 64 and 42% lower than on
control fruit after 3 and 7 days of incubation, respectively. Pathogen sporulation was 70 and
45% lower than on control fruit after these incubation periods. Disease severity was not
significantly affected by UV-C treatments. On ‘Ortanique’ mandarins, treatments with UV-C
light at 2.5 kJ/m2 reduced green mould incidence by 56% compared to non-treated fruit after
7 days of incubation. However, disease incidence and pathogen sporulation on ‘Ortanique’
mandarins treated with UV-C light at 5 kJ/m2 were similar to those on control fruit. In this
case, although no rind damage was observed at the naked eye, UV-C light application
probably resulted on slight phytotoxicity that counteracted the resistance induction. It can be
concluded from these experiments that the election of the right UV-C dose was essential for
the suitability of the treatments. |
| format | conferenceObject |
| id | ReDivia7079 |
| institution | Instituto Valenciano de Investigaciones Agrarias (IVIA) |
| language | Inglés |
| publishDate | 2021 |
| publishDateRange | 2021 |
| publishDateSort | 2021 |
| publisher | CIGR-AgEng |
| publisherStr | CIGR-AgEng |
| record_format | dspace |
| spelling | ReDivia70792025-04-25T14:52:34Z On-line UV-C prototype for postharvest antifungal treatment of citrus fruits Ibiza Mauri, Salvador Montesinos-Herrero, Clara Palou, Lluís Adrados, Carlos M. UV-C radiation Postharvest citrus Green mould J10 Handling, transport, storage and protection of agricultural products Q02 Food processing and preservation Prototypes Penicillium digitatum Synthetic fungicides used for postharvest treatment of citrus fruits are considered by consumers as a risk to human health and environment and alternatives to these chemicals that leave no residue on fruit are increasingly demanded. UV-C light irradiation is a clean and safe technology that when applied at the right doses may induce fruit resistance to postharvest diseases, reducing the need for chemical treatments. The objective of present study was to evaluate the preventive effect of UV-C light treatments against citrus postharvest green mould caused by the pathogen Penicillium digitatum. For this purpose, ‘Lanelate’ oranges and ‘Ortanique’ mandarins were puncture-injured in one side of the equatorial zone, treated with UV-C light at doses of 2.5 or 5 kJ/m2 and held at 20ºC and 90% RH for 6 days before inoculation with P. digitatum at 103 or 104 spores/ml. Control fruit was inoculated but not treated. Four replicates of 10 fruit each were used for each treatment. A new UV-C reactor prototype was used for postharvest treatment of citrus fruits. This prototype was able to treat the fruit while rolling, therefore exposing the surface of the fruit more homogeneously to UV-C light. The reactor, assembled on a commercial 3-m long roller conveyor, consisted of three low pressure 55-W mercury-vapour lamps, mounted on an aluminium frame placed 16 cm above the conveyor belt. UV-C average power supplied by the lamps at 6 cm above the conveyor belt was 5 mW/cm2. In order to regulate the flow rate and thus the UV-C exposure dose, the speed of the conveyor belt was set to provide a treatment time from 25 s to 2 min, which yielded a UV-C light dose from 2.25 to 5 kJ/m2, respectively. The number of infected fruit (disease incidence) as well as the diameter of the lesion (disease severity) and the percentage of fruit showing sporulated lesions (pathogen sporulation) were assessed after 3 and 7 days of incubation at 20ºC. Green mould incidence on ‘Lanelate’ oranges treated with a UV-C dose of 5 kJ/m2 was 64 and 42% lower than on control fruit after 3 and 7 days of incubation, respectively. Pathogen sporulation was 70 and 45% lower than on control fruit after these incubation periods. Disease severity was not significantly affected by UV-C treatments. On ‘Ortanique’ mandarins, treatments with UV-C light at 2.5 kJ/m2 reduced green mould incidence by 56% compared to non-treated fruit after 7 days of incubation. However, disease incidence and pathogen sporulation on ‘Ortanique’ mandarins treated with UV-C light at 5 kJ/m2 were similar to those on control fruit. In this case, although no rind damage was observed at the naked eye, UV-C light application probably resulted on slight phytotoxicity that counteracted the resistance induction. It can be concluded from these experiments that the election of the right UV-C dose was essential for the suitability of the treatments. 2021-02-08T09:02:28Z 2021-02-08T09:02:28Z 2012 conferenceObject Ibiza, S., Montesinos-Herrero, C., Palou, L., & Adrados, C. M. (2012). On-line UV-C prototype for postharvest antifungal treatment of citrus fruits. In: Post Harvest, Food and Process Engineering. International Conference of Agricultural Engineering-CIGR-AgEng 2012: agriculture and engineering for a healthier life, Valencia, Spain, 8-12 July 2012. CIGR-EurAgEng. http://hdl.handle.net/20.500.11939/7079 en 2012-07-08 International Conference of Agricultural Engineering-CIGR-AgEng 2012 València, Spain Atribución-NoComercial-SinDerivadas 3.0 España http://creativecommons.org/licenses/by-nc-nd/3.0/es/ openAccess CIGR-AgEng electronico |
| spellingShingle | UV-C radiation Postharvest citrus Green mould J10 Handling, transport, storage and protection of agricultural products Q02 Food processing and preservation Prototypes Penicillium digitatum Ibiza Mauri, Salvador Montesinos-Herrero, Clara Palou, Lluís Adrados, Carlos M. On-line UV-C prototype for postharvest antifungal treatment of citrus fruits |
| title | On-line UV-C prototype for postharvest antifungal treatment of citrus fruits |
| title_full | On-line UV-C prototype for postharvest antifungal treatment of citrus fruits |
| title_fullStr | On-line UV-C prototype for postharvest antifungal treatment of citrus fruits |
| title_full_unstemmed | On-line UV-C prototype for postharvest antifungal treatment of citrus fruits |
| title_short | On-line UV-C prototype for postharvest antifungal treatment of citrus fruits |
| title_sort | on line uv c prototype for postharvest antifungal treatment of citrus fruits |
| topic | UV-C radiation Postharvest citrus Green mould J10 Handling, transport, storage and protection of agricultural products Q02 Food processing and preservation Prototypes Penicillium digitatum |
| url | http://hdl.handle.net/20.500.11939/7079 |
| work_keys_str_mv | AT ibizamaurisalvador onlineuvcprototypeforpostharvestantifungaltreatmentofcitrusfruits AT montesinosherreroclara onlineuvcprototypeforpostharvestantifungaltreatmentofcitrusfruits AT paloulluis onlineuvcprototypeforpostharvestantifungaltreatmentofcitrusfruits AT adradoscarlosm onlineuvcprototypeforpostharvestantifungaltreatmentofcitrusfruits |