Metoder för att beskriva kumulativa effekter med avseende på biologisk mångfald och vägar
Cumulative effects are seldom treated in Swedish Environmental Impact Assessments (EIA). This report treats these questions and which procedures and methods that can be used when assessing cumulative effects in EIA. This report is a literature study where also a case study is a part. The case st...
| Main Author: | |
|---|---|
| Format: | L3 |
| Language: | Swedish Inglés |
| Published: |
SLU/Dept. of Landscape Architecture, Planning and Management (from 130101)
2004
|
| Subjects: |
| _version_ | 1855571875673931776 |
|---|---|
| author | Rodéhn, Johan |
| author_browse | Rodéhn, Johan |
| author_facet | Rodéhn, Johan |
| author_sort | Rodéhn, Johan |
| collection | Epsilon Archive for Student Projects |
| description | Cumulative effects are seldom treated in Swedish Environmental Impact Assessments (EIA). This report treats these questions and which procedures and methods that can be used when assessing cumulative effects in EIA.
This report is a literature study where also a case study is a part. The case study shows how existing methods for cumulative effects can be used in practice. The report is concentrated on biology and treats cumulative effects on premises of biodiversity and roads.
Cumulative effects include both direct and indirect effects. Beyond the planned project also past, present and foreseeable future action shall be included. All impacts contributing to the effects on the environment shall be included, no matter who causes them. Besides cumulative effects from many different actions they can also be caused of many different environmental effects from one single project. One common procedure to describe cumulative effects is to make scoping, describe the affected environment and to establish the environmental consequences from cumulative effects. Methods that can be used in the procedure are questionnaires, interviews, panels, expert opinions, consultations, checklists, network- and system diagrams, modeling and trend analysis. These are often used in traditional EIA too. Methods that are more directly adapted to cumulative effects are overlay maps, carrying capacity, threshold analysis and ecosystem analysis. Which methods that should be used in the different steps of the procedure is better to decide during the process depending on the nature of the project, the natural resources and the effects.
In the two Swedish road EIAs, that have been examined, cumulative effects are not described even if it is most probable that they will occur. This is in conflict with the EU-directive 97/11/EC. The EIA:s could also have contained one part with cumulative effects where natural paths and reduced biotop are concerned. The two Canadian cumulative EIAs, that have been examined, handle cumulative effects very detailed. They show that good routines about describing cumulative effects exist in Canada.
A case study has been made to test, in practice, the procedure and the methods that exist. It is located in an area east of the community Björklinge in Uppland. Five scenarios have been developed for the area. 1: A new E4 and a new road 700 are built. The other scenarios as 1 but: 2: the wildlife tunnel does not work, 3: one additional highway is built, 4: the moose population is wanted to increase, 5: moose hunting stopped. Methods that where used in the first step were expert opinion, interview (with hunter) and trend analysis. In the middle part trendanalysis and in the last part network diagram, carrying capacity and expert opinion (wildlife researcher) was used. Cumulative effects could be identified in scenario 3, 4 and 5. Scenario 1 is the most realistic one.
In Sweden there are political goals saying that both traffic and environment should be promoted. To reach these goals it is important to describe effects in an entirety perspective. In other countries there are experiences of how to describe cumulative effects. This means that it is not necessary to develop new procedures or methods, the same can be used in Sweden too.
To ensure good quality in the process of road planning, cumulative effects should be treated in both pilot study, road investigation and working plan. Only significant cumulative effects should be estimated. In such cases the county administration board should decide the project as a project that might give significant environmental effects, even if the project itself does not give significant effects. |
| format | L3 |
| id | RepoSLU11449 |
| institution | Swedish University of Agricultural Sciences |
| language | swe Inglés |
| publishDate | 2004 |
| publishDateSort | 2004 |
| publisher | SLU/Dept. of Landscape Architecture, Planning and Management (from 130101) |
| publisherStr | SLU/Dept. of Landscape Architecture, Planning and Management (from 130101) |
| record_format | eprints |
| spelling | RepoSLU114492017-10-05T08:02:44Z Metoder för att beskriva kumulativa effekter med avseende på biologisk mångfald och vägar Methods for description of cumulative impacts regarding biodiversity and roads Rodéhn, Johan EIA kumulativ MKB biologisk mångfald vägverket väg miljö miljöeffekter konsekvenser miljökonsekvensbeskrivning Cumulative effects are seldom treated in Swedish Environmental Impact Assessments (EIA). This report treats these questions and which procedures and methods that can be used when assessing cumulative effects in EIA. This report is a literature study where also a case study is a part. The case study shows how existing methods for cumulative effects can be used in practice. The report is concentrated on biology and treats cumulative effects on premises of biodiversity and roads. Cumulative effects include both direct and indirect effects. Beyond the planned project also past, present and foreseeable future action shall be included. All impacts contributing to the effects on the environment shall be included, no matter who causes them. Besides cumulative effects from many different actions they can also be caused of many different environmental effects from one single project. One common procedure to describe cumulative effects is to make scoping, describe the affected environment and to establish the environmental consequences from cumulative effects. Methods that can be used in the procedure are questionnaires, interviews, panels, expert opinions, consultations, checklists, network- and system diagrams, modeling and trend analysis. These are often used in traditional EIA too. Methods that are more directly adapted to cumulative effects are overlay maps, carrying capacity, threshold analysis and ecosystem analysis. Which methods that should be used in the different steps of the procedure is better to decide during the process depending on the nature of the project, the natural resources and the effects. In the two Swedish road EIAs, that have been examined, cumulative effects are not described even if it is most probable that they will occur. This is in conflict with the EU-directive 97/11/EC. The EIA:s could also have contained one part with cumulative effects where natural paths and reduced biotop are concerned. The two Canadian cumulative EIAs, that have been examined, handle cumulative effects very detailed. They show that good routines about describing cumulative effects exist in Canada. A case study has been made to test, in practice, the procedure and the methods that exist. It is located in an area east of the community Björklinge in Uppland. Five scenarios have been developed for the area. 1: A new E4 and a new road 700 are built. The other scenarios as 1 but: 2: the wildlife tunnel does not work, 3: one additional highway is built, 4: the moose population is wanted to increase, 5: moose hunting stopped. Methods that where used in the first step were expert opinion, interview (with hunter) and trend analysis. In the middle part trendanalysis and in the last part network diagram, carrying capacity and expert opinion (wildlife researcher) was used. Cumulative effects could be identified in scenario 3, 4 and 5. Scenario 1 is the most realistic one. In Sweden there are political goals saying that both traffic and environment should be promoted. To reach these goals it is important to describe effects in an entirety perspective. In other countries there are experiences of how to describe cumulative effects. This means that it is not necessary to develop new procedures or methods, the same can be used in Sweden too. To ensure good quality in the process of road planning, cumulative effects should be treated in both pilot study, road investigation and working plan. Only significant cumulative effects should be estimated. In such cases the county administration board should decide the project as a project that might give significant environmental effects, even if the project itself does not give significant effects. Kumulativa effekter hanteras sällan i svenska miljökonsekvensbeskrivningar (MKB). Det här arbetet hanterar dessa frågor och vilka tillvägagångssätt och metoder som kan användas för att beskriva kumulativa effekter i MKB. Det här arbetet är en litteraturstudie. En fallstudie ingår och visar hur metoder som finns för att beskriva kumulativa effekter, kan användas i praktiken. Arbetet är inriktat mot biologi och tar upp kumulativa effekter utifrån biologisk mångfald och vägar. Kumulativa effekter innefattar både direkta och indirekta effekter. Utöver konsekvenser av den planerade verksamheten ska också tidigare och andra pågående verksamheter liksom verksamheter inom en överskådlig framtid inkluderas i MKB. Alla bidragande miljöeffekter ska tas med oavsett vilken verksamhet som orsakar dem. Förutom samlade effekter från flera verksamheter kan kumulativa effekter uppstå av att flera olika miljöeffekter från samma verksamhet tillsammans får kraftigare effekt. Ett vanligt tillvägagångssätt för att beskriva kumulativa effekter är att göra avgränsning, beskriva den påverkade miljön och fastställa miljökonsekvenser från kumulativa effekter. Metoder som kan användas för att genomföra beskrivningen är frågeformulär, intervjuer, paneler, expertuttalanden, samråd, checklistor, matriser, nätverk, systemdiagram, modellering och trendanalys. Dessa används också ofta i traditionell MKB. Metoder som är mer direkt anpassade för kumulativa effekter är överläggskartor, bärförmåga, tröskelvärdesanalys och ekosystemanalys. Vilka metoder som ska användas bör bestämmas under arbetets gång beroende på projektets, naturresursernas och effekternas karaktär. I de svenska MKB:er som har granskats i det här arbetet beskrivs inte kumulativa effekter trots att det är troligt att detta uppstår. Det strider mot EG-direktivet 97/11/EG. MKBdokumenten skulle även kunna ha innefattat en del med kumulativa effekter där det t. ex. tas hänsyn till vandringsstråk och vad en biotopreducering innebär. De två kanadensiska MKB:er som granskats hanterar kumulativa effekter mycket ingående. De ger exempel på att det finns bra rutiner i Kanada för hur kumulativa effekter kan beskrivas. En fallstudie har gjorts som ett sätt att i praktiken testa tillvägagångssätt och metoder. Den är lokaliserad till ett område öster om samhället Björklinge, Uppland. Fallstudien omfattar fem scenarios. 1: ny E4 med vilttunnel och ny väg 700 byggs. Övriga fall som 1 med tillägg av; 2: vilttunnel under E4 fungerar ej, 3: ytterligare en motorväg byggs, 4: man vill öka älgstammen, 5: älgjakt upphör. I det första steget användes metoderna experttutalande, intervju (med jägare) och trendanalys. I mellersta steget trendanlyser och i det avslutande steget nätverksdiagram, bärförmåga och expertuttalande (viltforskare). Kumulativa effekter kunde antas i scenario 3, 4 och 5. Det är troligast att scenario 1 genomförs. I Sverige finns det politiska mål som säger att både trafik och miljö ska främjas. För att nå dessa mål är det viktigt att beskriva effekter på miljön utifrån ett helhetsperspektiv. Det finns i flera länder en erfarenhet hur kumulativa effekter ska hanteras så resurser inte behöver läggas på att utveckla tillvägagångssätt och metoder från grunden. Kumulativa effekter bör behandlas i både förstudie, vägutredning och arbetsplan. En avgränsning bör göras till de betydande kumulativa effekterna och Länsstyrelsen bör i det fallet bedöma projektet som betydande miljöpåverkan, även om projektet självt inte ger betydande effekter. SLU/Dept. of Landscape Architecture, Planning and Management (from 130101) 2004 L3 swe eng https://stud.epsilon.slu.se/11449/ |
| spellingShingle | EIA kumulativ MKB biologisk mångfald vägverket väg miljö miljöeffekter konsekvenser miljökonsekvensbeskrivning Rodéhn, Johan Metoder för att beskriva kumulativa effekter med avseende på biologisk mångfald och vägar |
| title | Metoder för att beskriva kumulativa effekter med avseende på biologisk mångfald och vägar |
| title_full | Metoder för att beskriva kumulativa effekter med avseende på biologisk mångfald och vägar |
| title_fullStr | Metoder för att beskriva kumulativa effekter med avseende på biologisk mångfald och vägar |
| title_full_unstemmed | Metoder för att beskriva kumulativa effekter med avseende på biologisk mångfald och vägar |
| title_short | Metoder för att beskriva kumulativa effekter med avseende på biologisk mångfald och vägar |
| title_sort | metoder för att beskriva kumulativa effekter med avseende på biologisk mångfald och vägar |
| topic | EIA kumulativ MKB biologisk mångfald vägverket väg miljö miljöeffekter konsekvenser miljökonsekvensbeskrivning |